FORWELL Q.D.C.S冲床专用快速换模系统,提供给各式冲床模具多样性的快速换模专用元件,此系统的使用,不仅降低了冲床的闲置时间,并且大大的促进了产能的提升,使得生产管理更为合理化。
FORWELL Q.M.C.S注塑机压铸机快速换模系统,提供给各式注塑机、压铸机模具多样性的快速换模专用元件,此系统的使用,不仅减少了闲置时间,并且大大的促进了产能的提升,使得生产管理更为合理化。
富伟印刷电路板油压冲孔脱料系统,乃是空气压转换为油压动力源组合,冲孔脱料台盘组合及快速换模系统等所组成,而冲孔前压板压力及冲孔后油压平均脱料之动作及出力可依不同材质来调整,以达到业界追求高品质的要求。
除了换模系统产品以外,FORWELL也提供了宽广适用范围的空油压组件与设备,这些包括供塑胶注塑模具用,和工件夹具系统使用的套件等等,下面图示说明的产品,如果对您的生产机具有所效用,请与我们联络,做更技术性的了解。
此型夹模器有节省空间的好处,但模沿须有"U"型沟供其夹持,其底部被制成适合在台盘"T"型槽滑动。
当您使用起重机或叉架升降机作模具更换时,共有三种不同的型式设计,包括RC(移动式)、RD(折下式)与 RE/RF(旋转式)系列,可供选用移模臂使用,可以使模具更容易的移到冲床台盘确实位置。
型号 | 模具引出长 (L) | 最大荷重 ( kg ) | 全长 ( A ) |
---|---|---|---|
RC-500-800 | 500 | 800 | 550 |
RC-500-1250 | 500 | 1250 | 550 |
RC-500-1600 | 500 | 1600 | 550 |
RC-700-600 | 700 | 600 | 750 |
RC-700-1000 | 700 | 1000 | 750 |
RC-800-800 | 800 | 800 | 850 |
RC-800-1600 | 800 | 1600 | 850 |
RC-800-2000 | 800 | 2000 | 850 |
RC-900-1600 | 900 | 1600 | 950 |
RC-1000-1600 | 1000 | 1600 | 1050 |
型号 | 固定座 | 滚轮数 | 安装尺寸 | 固定座型式 | ||
---|---|---|---|---|---|---|
B | C | H | ||||
RC-500-800 | 115 | 46 | 120 | 5 | A 式 | RC-120 |
RC-500-1250 | 160 | RC-160 | ||||
RC-500-1600 | 50 | 200 | B 式 | RC-200 | ||
RC-700-600 | 46 | 120 | 7 | A 式 | RC-120 | |
RC-700-1000 | 160 | RC-160 | ||||
RC-800-800 | 160 | 8 | ||||
RC-800-1600 | 50 | 200 | B 式 | RC-200 | ||
RC-800-2000 | 200 | 9 | C 式 | RC-200 | ||
RC-900-900 | 200 | 9 | B 式 | RC-200 | ||
RC-1000-1600 | 10 |
型号 | 模具引出长 (L) | 最大荷重 ( kg ) | 全长 ( A ) |
---|---|---|---|
RC-1200-2500 | 1200 | 2500 | 1250 |
RC-1300-2500 | 1300 | 2500 | 1350 |
RC-1400-2500 | 1400 | 2500 | 1450 |
RC-1500-2500 | 1500 | 2500 | 1550 |
RC-1600-2500 | 1600 | 2500 | 1650 |
RC-1700-2500 | 1700 | 2500 | 1750 |
型号 | 固定座 | 滚轮数 | 安装尺寸 | 固定座型式 | ||
---|---|---|---|---|---|---|
B | C | H | ||||
RC-1200-2500 | 115 | 45 | 120 | 14 | A 式 | RC-120 |
RC-1300-2500 | 15 | |||||
RC-1400-2500 | 17 | |||||
RC-1500-2500 | 18 | |||||
RC-1600-2500 | 19 | |||||
RC-1700-2500 | 20 |
型号 | 模具引出长 (L) | 最大荷重 ( kg ) | 全长 ( A ) |
---|---|---|---|
RD-500-800 | 500 | 800 | 550 |
RD-500-1250 | 500 | 1250 | 550 |
RD-500-1600 | 500 | 1600 | 550 |
RD-700-600 | 700 | 600 | 750 |
RD-700-1000 | 700 | 1000 | 750 |
RD-800-800 | 800 | 800 | 850 |
RD-800-1600 | 800 | 1600 | 850 |
RD-800-2000 | 800 | 2000 | 850 |
RD-900-900 | 900 | 900 | 950 |
RD-1000-1600 | 1000 | 1600 | 1050 |
型号 | 固定座 | 滚轮数 | 安装尺寸 | 拆下时尺寸 | |||
---|---|---|---|---|---|---|---|
B | C | H | X | Y | |||
RD-500-800 | 115 | 52 | 120 | 5 | A 式 | 140 | 620 |
RD-500-1250 | 160 | 180 | 660 | ||||
RD-500-1600 | 200 | B 式 | 220 | 700 | |||
RD-700-600 | 120 | 7 | A 式 | 140 | 820 | ||
RD-700-1000 | 160 | 180 | 860 | ||||
RD-800-800 | 160 | 8 | B 式 | 180 | 960 | ||
RD-800-1600 | 200 | 220 | 1000 | ||||
RD-800-2000 | 200 | 9 | C 式 | 220 | 1000 | ||
RD-900-1600 | 200 | 9 | B 式 | 220 | 1100 | ||
RD-1000-1600 | 10 | 1200 |
型号 | 模具引出长 (L) | 最大荷重 ( kg ) | 全长 ( A ) |
---|---|---|---|
RE.RF-500-800 | 500 | 800 | 550 |
RE.RF-500-1250 | 500 | 1250 | 550 |
RE.RF-700-600 | 700 | 600 | 750 |
RE.RF-700-1600 | 700 | 1600 | 750 |
RE.RF-800-800 | 800 | 800 | 850 |
RE.RF-800-1600 | 800 | 1600 | 850 |
RE.RF-500-1600 | 500 | 1600 | 550 |
RE.RF-900-1600 | 900 | 1600 | 950 |
型号 | 固定座 | 滚轮数 | 安装尺寸 | 拆下时尺寸 | |||
---|---|---|---|---|---|---|---|
B | C | H | X | Y | |||
RE.RF-500-800 | 525 | 115 | 120 | 5 | A 式 | 90 | 150 |
RE.RF-500-1250 | 525 | 160 | |||||
RE.RF-700-600 | 725 | 120 | 7 | ||||
RE.RF-700-1600 | 725 | 200 | 7 | B 式 | |||
RE.RF-800-800 | 825 | 160 | 8 | A 式 | |||
RE.RF-800-1600 | 825 | 200 | 8 | B 式 | |||
RE.RF-500-1600 | 525 | 5 | |||||
RE.RF-900-900 | 925 | 9 |
操作控制箱为本快速换模系统状态显示, 与功能操作介面,上半部(1~10)为显 示与自动操作功能,下半部(11~17)为 手动操作功能按键。
配合脱料能力配备不同夹模器,使更换模具简单快速。 夹模器有效强力夹模,冲孔时模具不滑动。 动力源采用气动泵组合,临时停电或空气压消失时,夹模能长时间保持,节省换模时间使作业更安全,提高生产效率。
DR型举模器可藉由填隙片的增减,很容易的适用不同尺寸的"T"型槽或"U"型槽。 其基本长度有200mm与300mm两种尺寸,经过搭配使用,可产生每100mm的总度变化。
型号 | a | H |
---|---|---|
DR-22 | 22 | 33-43 |
DR-28 | 28 | 45-58 |
基本型式 | 宽度 (mm) | 长度 (mm) | 弹簧数量 (pcs) | 单一弹簧举模力 (kgf) |
---|---|---|---|---|
DRL-22-200/DRB22-200 | 22 | 200 | 4 | 37.5 |
DRL-22-300/DRB22-300 | 22 | 300 | 6 | 37.5 |
DRL-28-200/DRB28-200 | 28 | 200 | 4 | 75 |
DRL-28-300/DRB28-300 | 28 | 300 | 6 | 75 |
* DRL-22/DRB-22 耐热温度80℃
* DRL-28/DRB-28 耐热温度150℃
单一举模器最大举模力 (kgf)
mm kgf 型号 |
200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 |
---|---|---|---|---|---|---|---|---|---|
DR-22 | 150 | 225 | 300 | 375 | 450 | 525 | 600 | 675 | 750 |
DR-28 | 300 | 450 | 600 | 750 | 900 | 1050 | 1200 | 1350 | 1500 |
单一举模器最大举模力 (kgf)
mm kgf 型号 |
1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1700 | 1800 | 1900 | 2000 |
---|---|---|---|---|---|---|---|---|---|---|
DR-22 | 825 | 900 | 975 | 1050 | 1125 | 1200 | 1275 | 1350 | 1425 | 1500 |
DR-28 | 1650 | 1800 | 1950 | 2100 | 2250 | 2400 | 2550 | 2700 | 2850 | 3000 |
This compact, space saving, piston type clamp requires U-slots on the die shoe. The clamp leg is machined to fit the T-slot on the bolster. With the TX 型夹模器 automatic slide model remote control is made possible.
型号 | Unit | TX-1 | TX-2 | TX-4 | TX-6 | TX-10 | TX-16 | TX-25 |
---|---|---|---|---|---|---|---|---|
夹模器ing Farce(at 250kgf/cm2) | tons | 1 | 2 | 4 | 6.3 | 10 | 16 | 25 |
Full Stroke (X) | mm | 5 | 8 | 8 | 8 | 8 | 8 | 8 |
夹模器ing Stroke (Y) | mm | 2.5 | 4 | 3 | 3 | 3 | 3 | 3 |
Extra Stroke (Z) | mm | 2.5 | 4 | 5 | 5 | 5 | 5 | 5 |
Cylinder Capacity at Full Stroke | cc | 2.7 | 6.5 | 13 | 21 | 32 | 54 | 84 |
Extra stroke is the difference between full stroke and clamping stroke with extra space allowed for safe operation.
型号 | E | F | G | H | K | MIN. | PT |
---|---|---|---|---|---|---|---|
TX-1 | 38 | 37 | 14 | 35 | 11 | 8 | 1/8 |
TX-2 | 53 | 52.5 | 18 | 38 | 12 | 8 | 1/8 |
TX-4 | 68 | 61.5 | 23 | 59 | 15 | 10 | 1/4 |
TX-6 | 78 | 68 | 27 | 59 | 16 | 14 | 1/4 |
TX-10 | 98 | 71 | 38 | 79 | 16 | 17 | 1/4 |
TX-16 | 127 | 78.5 | 48 | 88 | 16 | 20 | 1/4 |
TX-25 | 148 | 100 | 58 | 98 | 15 | 23 | 1/4 |
Die shoe thickness(h)Classify:25、30、35、40、45、50、55、60mm.
Before purchase, please verify mold edge thickness (h) and T-slot (A.B.C.D.) has standard or special dimensions.
型号 | A | B | C | D | 动力源组合 型号s |
---|---|---|---|---|---|
TX-1 | 22 | 37 | 16 | 24 | FP6308U-口-口 |
TX-2 | 22 | 37 | 16 | 24 | |
TX-4 | 22 | 37 | 16 | 24 | |
TX-6 | 28 | 48 | 20 | 28 | |
TX-10 | 28 | 48 | 20 | 28 | FP1014U-口-口 |
TX-16 | 28 | 48 | 23 | 28 | |
TX-25 | 36 | 56 | 25 |
Die shoe thickness(h)Classify:25、30、35、40、45、50、55、60mm.
Before purchase, please verify mold edge thickness (h) and T-slot (A.B.C.D.) has standard or special dimensions.
As this lever-type clamp does not require a U-slot on the die shoe it can be used in a wide range of applications. The TY type 夹模器 are machined to fit into the T-slot of the bolster for extra secure positioning. The flange-mount model 夹模器 can be bolted onto the bolster and the automatic slider model 夹模器 makes remote automatic operation possible.
All Forwell 射出机压铸机快速换模系统s use high quality 夹模器 for very secure clamping, quick mold changing and safer operations. These clamps can fasten Molds whether they are changed vertically or horizontally.
There are also a range of different 夹模器 available to suit your injection molding or mold casting requirements. The TY type 夹模器 are machined to fit into the T-slot of the bolster for extra secure positioning. The flange-mount model 夹模器 can be bolted onto the bolster and the automatic slider model 夹模器 makes remote automatic operation possible.
The following specifications can help you choose the appropriate clamp type in accordance with your injection molding requirements and production situation. Make sure of your production plans and production procedure before choosing your product to be sure of the product that best suits your needs.
Mold Plate | Mold Change Direction | 夹模器ing type | Characteristics |
---|---|---|---|
No Union | Vertically | 活动侧 夹模器 | 固定侧 in with T-slot |
Union | Vertically | 固定侧 & 活动侧 夹模器 | 夹模器 fixed or 活动侧 on plate |
Horizontally | 固定侧 夹模器 | Install roller or sliding rail upon the plate. Use cart or mold exchange table for easy operation and the shortest possible mold changing time. |
型号 | Unit | TY-1 | TY-2 | TY-4 | TY-6 | TY-10 | TY-16 | TY-25 |
---|---|---|---|---|---|---|---|---|
机台能力s 夹模器ing (at 250Kg/cm2) | tons | 1 | 2 | 4 | 6.3 | 10 | 16 | 25 |
Full Stroke (X) | mm | 6 | 7 | 7 | 8 | 8 | 7 | 8 |
夹模器ing Stroke (Y) | mm | 3 | 2 | 3 | 4 | 3 | 3 | 3 |
Extra Stroke (Z) | mm | 3 | 5 | 4 | 4 | 5 | 4 | 5 |
Cylinder Capacity st Full Stroke | cc | 2 | 6.5 | 13.2 | 22.3 | 37 | 61 | 93 |
For a closer look at the exact dimensions of the TY series die clamps please see the following diagram and table.
型号 | min.E | F | G | J | K | L | max.N | P | R | min.S | PT | min.C | min.A |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TY-1 | 49.5 | 46 | 20 | 15 | 58 | 73 | 10 | 10 | 34 | 16.5 | 1/8 | 7 | 10 |
TY-2 | 59 | 63 | 28 | 22 | 85 | 107 | 10 | 12.5 | 48 | 27 | 1/8 | 9.5 | 12.5 |
TY-4 | 85 | 87 | 40 | 25 | 120 | 145 | 10 | 16 | 12 | 32 | 1/4 | 12 | 15 |
TY-6 | 94 | 97 | 44 | 29.5 | 133 | 162.5 | 11 | 20 | 12 | 40 | 1/4 | 14 | 19 |
TY-10 | 105 | 110 | 50 | 28 | 165 | 193 | 11 | 20 | 19 | 53 | 1/4 | 16.5 | 23 |
TY-16 | 120 | 130 | 60 | 30 | 200 | 230 | 12 | 20 | 25 | 67 | 1/4 | 19 | 27 |
TY-25 | 133 | 150 | 73 | 30 | 240 | 270 | 13 | 20 | 30 | 81 | 1/4 | 22 | 32 |
型号 | A | B | C | D | 动力源组合 型号s |
---|---|---|---|---|---|
TY-1 | 22 | 37 | 16 | 24 | FP6308U-4-4C |
TY-2 | 22 | 37 | 16 | 24 | |
TY-4 | 22 | 37 | 16 | 24 | FP1014U-4-4C |
TY-6 | 28 | 48 | 20 | 28 | |
TY-10 | 28 | 48 | 20 | 28 | |
TY-16 | 28 | 48 | 23 | 28 | |
TY-25 | 36 | 56 | 25 | 28 |
Die shoe thickness (h) available: 25, 30, 35, 40, 45, 50, 55, 60mm.
Before purchasing, please verify if the mold edge thickness (h) and T-slot (A.B.C.D.) have standard or special dimensions.
This vertical type clamp does not require a U-slot on the die shoe.The clamping stroke will be longer.
型号 | TD-2 | TD-4 | TD-6 | TD-10 |
---|---|---|---|---|
夹模器ing Force ( at 250 kg / cm2 ) ( tons ) | 2 | 4 | 6.3 | 10 |
Full Stroke ( X ) ( mm ) | 13 | 15 | 15 | 20 |
Flamping Stroke ( Y ) ( mm ) | 9 | 10 | 10 | 15 |
Extra Stroke ( Z ) ( mm ) | 4 | 5 | 5 | 5 |
Cylinder Capacity st Full Stroke ( cc ) | 12.5 | 30 | 42.5 | 89 |
Extra stroke is the difference between full stroke and clamping stroke with extra space allowed for safe operation.
型号 | min.H | min.L | min.K |
---|---|---|---|
TD-2 | 15 | 38.5 | 50 |
TD-4 | 24 | 54 | 58 |
TD-6 | 29 | 59 | 63 |
TD-10 | 29 | 72 | 70 |
Notice if ”N ”size is suitable for the die in closed condition.
型号 | E | F | G | I | K | M | O | min.N | min.A | min.C | A | B | C | D | 动力源组合 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TD-2 | 107 | 57 | 17 | 30 | 50 | 102 | 61 | F+25 | 12.5 | 9.5 | 22 | 37 | 16 | 24 | FP6308U-☐-☐ |
TD-4 | 130 | 63 | 28 | 40 | 58 | 120 | 80 | F+35 | 15 | 12 | 22 | 37 | 16 | 24 | FP1014U-☐-☐ |
TD-6 | 145 | 68 | 28 | 45 | 63 | 130 | 90 | F+40 | 19 | 14 | 28 | 48 | 20 | 28 | |
TD-10 | 165 | 92.5 | 39 | 52.5 | 70 | 145 | 105 | F+45 | 23 | 16.5 | 28 | 48 | 20 | 28 |
Before purchase, please verify mold edge thickness (h) and T-Slot(A.B.C.D) has standard or special dimensions.